Truck Test

G1 Test

M1 Test

AirBrake Test

Ontario Class A Test

Ontario Class D Test

Ontario Road Signs Test

Air Brake Test 2

1. What does an ABS system do?

 
 
 
 

2. Excessive brake temperature can be avoided in vehicles which are fitted with?

 
 
 
 

3. Which of these circumstances is not likely to increase the operating temperature of the brakes?

 
 
 
 

4. Wedge brake systems are designed to be?

 
 
 
 

5. When making any inspection, drivers should be on guard for?

 
 
 
 

6. You will place abnormal demand on your brake system if you?

 
 
 
 

7. In the ‘S’ cam brake system, what does a brake spider hold?

 
 
 
 

8. Which of these parts would you find on a disk air brake system?

 
 
 
 

9. Which of these significantly decreases the brake force produced at the wheel?

 
 
 
 

10. When towing a trailer, you will usually be able to tell if it is employing ABS by?

 
 
 
 

11. If a vehicle fails to comply with the specific requirements for the safe operation of commercial motor vehicles as set out in the Ontario Highway Traffic Act, the driver, operator and/or owner of the vehicle must?

 
 
 
 

12. Inspections of air brake systems should begin by checking?

 
 
 
 

13. When making an inspection of an air brake system, drivers should wear?

 
 
 
 

14. Brakes that are out of adjustment can be detected by?

 
 
 
 

15. Which of these parts would you not find on an “S” cam air brake system?

 
 
 
 

16. Brake fade is caused by?

 
 
 
 

17. When conducting an inspection of an air brake system, the vehicle should be parked?

 
 
 
 

18. When you double your speed, the demand on your brakes to come to a stop will increase by how much?

 
 
 
 

19. Which of these will not be a factor on how your vehicle’s brakes work?

 
 
 
 

20. The Ontario Highway Traffic Act requires that vehicles with air brakes must be checked at least once?

 
 
 
 

21. If a vehicle is found to be noncompliant with the safe operation requirements in the Ontario Highway Traffic Act, which of these sanctions may be applied?

 
 
 
 

22. What does the ‘S’ shape on the one end of the camshaft operate in the ‘S’ cam system?

 
 
 
 

23. How are wedge brake systems different to other drum brake systems?

 
 
 
 

24. For safety, the full capacity of the brake system must be available?

 
 
 
 

25. The best way to reduce harsh brake use is to?

 
 
 
 

26. Which of these parts would you not find on a wedge air brake system?

 
 
 
 

27. Which of these is not a part of a disc air brake system?

 
 
 
 

28. Which of these is essential to ensure that full braking force is available?

 
 
 
 

29. In extreme cases, brake fade can lead to?

 
 
 
 

30. A vehicle should have wheel chocks or blocks securing it in place during inspection if?

 
 
 
 

Question 1 of 30